Home/Articles

Engineering insights.

DFM, manufacturing, product design, and what we have learned shipping hardware over fifteen years.

Articles

Injection Molding Machine Components: Parts, Cycle, and Clamp Tonnage

Every main part of an injection molding machine and what it does: the injection unit, clamping unit, mold, ejector and…

Oct 21, 2026
3D Printing

The Rapid Prototyping Process: 7 Steps From CAD to Production

A step by step guide to the rapid prototyping process: defining what the prototype must prove, preparing CAD or reverse…

Oct 19, 2026
Articles

Undercuts in Injection Molding: Side Actions, Lifters and How to Design Them Out

What undercuts are in injection molding, how slides, lifters, collapsible cores and bumpoffs release them, what each adds to the…

Oct 12, 2026
Articles

How Circuit Boards Are Assembled: Inside a PCB Factory

Follow a circuit board through a real PCB assembly line, from receiving and kitting to stencil printing, pick and place,…

Oct 7, 2026
Articles

Acrylic vs. Polycarbonate: Choosing the Right Transparent Plastic

Acrylic or polycarbonate? Compare clarity, impact, heat, UV and cost for clear plastic parts, with datasheet values for molding grades,…

Oct 1, 2026
Articles

Nylon PA6 vs PA66: Which One Does Your Part Need?

PA6 and PA66 are the two most common nylons in injection molding. They look almost identical, but they behave differently…

Sep 29, 2026
Articles

Aluminum vs. Steel Tooling for Injection Molding: How to Choose the Right Mold Material

Aluminum or steel injection mold tooling? Compare lead time, upfront cost, tool life by SPI class, abrasive resins and lifetime…

Sep 28, 2026
Articles

Jaycon Joins the Manufacturers Association of Central Florida

After 15 years building products in Palm Bay, Jaycon has joined the Manufacturers Association of Central Florida (MACF). What MACF…

Sep 23, 2026
Articles

15 Years of Jaycon Systems: From a Kitchen Table to Engineering and Manufacturing

Jaycon Systems turns 15 in 2026. A look back at the open source hardware store, the boards reflowed in a…

Sep 12, 2026
Articles

6 Advanced Manufacturing Trends to Watch in 2027

The six advanced manufacturing trends that will shape 2027: AI in design and DFM, robots on the molding floor, reshoring…

Sep 8, 2026
Articles

How to Redesign for Moldability After You’ve Built a 3D-Printed MVP

From print to press: how to turn a 3D-printed MVP into an injection-moldable part without losing what the prototype proved,…

Sep 1, 2026
Articles

How to Use Your Campaign to Test Not Just Demand, but Manufacturability

Use your crowdfunding campaign to test manufacturability, not just demand. A founder's guide to DFM-aware prototypes, reward tiers as production…

Aug 27, 2026