Injection molding quotes at Jaycon are now instant. Upload a 3D file, choose material, finish and quantity, and see tooling and per part pricing with a lead time, without waiting on an email thread. Here is what launched, what qualifies, and what is coming next.

Asking three shops for a molding price used to mean sending a STEP file on Monday and comparing incomparable numbers on Thursday, because each shop assumed a different cavitation, a different steel and a different lead time. The bottleneck was never the machining. It was the back and forth.

That step is gone. Injection molding now quotes online on the Jaycon platform, and the price responds while you change the inputs.

Upload, configure, price. The flow described below, start to finish.

What launched

  • Instant pricing for injection molding. Upload a 3D file and get a number in minutes, not days
  • Tooling and per part as separate lines. No single lump sum that hides the real decision
  • Live lead times. The schedule updates with the options you pick
  • An engineer review before anything is cut. Every quote goes through DFM, whether you order or not

That last point is what separates an instant quote from an automated guess. The price is fast. The review is human.

What you upload

Three inputs get a usable number on the first try: a 3D file, a quantity and, if you know it, a material. You do not need a drawing to see a price, though you will need one before production if the part carries critical dimensions.

Upload panel with a dashed drop area reading Drop your 3D file and format chips for STEP, STP, IGES, IGS, STL and 3DM, beside a card showing the uploaded housing file
STEP and STP are the safest formats. IGES, IGS, STL and 3DM also work.

What quotes instantly, and what still goes to an engineer

Most enclosures, housings, brackets and covers price straight through. Geometry that forces the mold to open in more than one direction, unusual resins or very large shot sizes route to an engineer, and the quote comes back the same way, just not in the same minute.

Two gray molded enclosures compared, one labeled straight pull with arrows opening vertically and one labeled needs a side action with a side hole and a sideways arrow
The split is about how the tool opens, not about how much you are spending.
Straight throughGoes to an engineer first
Straight pull geometry with draftDeep undercuts needing side actions or lifters
Common thermoplastics such as ABS, PC, PP and nylonFilled, flame rated or medical grade resins
Standard SPI textures and finishesCosmetic A finishes and in mold decoration
Part sizes within our standard press rangeLarge shot sizes and multi material parts
If your part lands on the right column, nothing breaks. It routes to an engineer and comes back with the same breakdown.

What the number covers

On a molded part there are two costs and they behave differently. Tooling is cut once and runs for years. Molding repeats with every piece. Quoting them as one number hides the only decision that matters, which is at what volume the part makes sense.

Quote document preview with an itemized table showing tooling at 2,850 dollars, molding of 1,000 pieces at 390 dollars and a total of 3,240 dollars, with a 15 to 20 day lead time
Every quote is itemized and downloadable, ready to forward to purchasing.

Take a quote of $2,850 in tooling plus $390 for a run of 1,000 pieces. That is $3,240 total, or $3.24 per part. Hold the design still and change only the quantity:

Bar chart of cost per part falling from 3.24 dollars at 1,000 pieces to 0.50 dollars at 25,000 pieces
Illustrative figures based on the example above, not a price list.
QuantityTooling per partMolding per partAll-in per part
1,000 pcs$2.85$0.39$3.24
5,000 pcs$0.57$0.39$0.96
10,000 pcs$0.29$0.39$0.68
25,000 pcs$0.11$0.39$0.50
Molding per part is held constant here to isolate the effect of tooling amortization.

The same part goes from $3.24 to $0.50 without a single design change. That is why the useful question is rarely what does a part cost, but at what volume does this part make sense. If you are still deciding whether to cut steel at all, we walk through that threshold in when to stop 3D printing and start tooling.

Instant when possible, engineer when necessary

Every quote goes through a design for manufacturability review before tooling starts. An engineer checks wall thickness, draft, ribs and bosses, undercuts, corner radii and how the tool will actually open, and you get the findings in writing with recommendations.

This is the step that catches the expensive mistakes: a wall that will sink, a rib that will show on the cosmetic face, a draft angle that will scuff on ejection. Fixing those in CAD costs an afternoon. Fixing them in hardened steel costs weeks.

Coming next: PCB assembly quoting

Injection molding is the first process to go instant on the platform, not the last. PCB assembly quoting is next, and we are targeting the end of this year. The goal is the same: upload your files, see a real price and a real lead time, and get an engineer to look at the design before anything is built.

That combination is the point. Most hardware products are a molded enclosure wrapped around a board, and today those two quotes come from two different worlds on two different schedules. Quoting both in one place, from one supplier who builds both, removes an entire coordination problem from your program.

If you want to be in the first group to use it, tell us on the contact page and we will reach out when it opens.

Questions engineers ask before their first upload

Is the instant price the final price?

It is a real quote, generated from your geometry and your inputs. It changes only if the design changes or if the DFM review finds something that alters the tool, and you see the reason before you approve anything.

Can I reorder from the same mold?

Yes. Once the mold exists it stays ready, so a reorder skips the tooling line entirely and runs at the per part price.

Where are the parts actually made?

In Palm Bay, Florida, on our own floor. Molded, inspected and shipped domestically, with no ocean freight and no customs in the middle of your schedule. If you are weighing that against an offshore quote, we broke down the real numbers in the true cost of cheap overseas manufacturing.

How to get your first instant quote

  1. Upload your STEP file and set the quantity you need
  2. Pick material, finish and speed, and watch the price and lead time respond
  3. Review the DFM findings, then approve tooling when you are ready

Get a DFM review with your quote. Upload a STEP file and get tooling and piece pricing back along with the design changes that reduce defect risk before you cut steel. Start a quote, or see the whole flow on our platform.

Related reading