❯
All July Long: Use code SUMMERMFG10 for 10% off your next custom manufacturing order → Get Instant Quote
Deep STM32 (Cortex-M), STM32Cube, and ST sensor expertise on one accountable team. We design hardware around the STM32 F, L, H, U, and WB families, write firmware in STM32Cube/HAL, and ship through our own SMT line. Independent engineering expertise, not an official partnership.
From CubeMX project to shipped board. STM32-based products for industrial, medical, and consumer markets.
F0 to U5 across Cortex-M0+/M4/M7/M33. We size the MCU against power budget, peripheral mix, and security requirements.
Production firmware on HAL or LL drivers, generated from CubeMX. FreeRTOS, Azure RTOS, and bare-metal builds.
ST MEMS and sensors (IMUs, ToF, pressure, environmental) wired to STM32 over I2C, SPI, and X-CUBE middleware.
Bench bring-up, in-circuit programming via ST-LINK V3, functional test, and SMT assembly on every unit.
Four phases, with bring-up and validation in the same building as design.
STM32 family chosen against power, peripheral, and security needs. STM32U5 for low-power IoT, STM32H7 for compute-heavy industrial, STM32WB for BLE.
Schematic and layout in Altium, Eagle, or KiCad. STM32-specific PCB rules baked in: oscillator placement, USB diff pairs, and decoupling.
Project generated in CubeMX, drivers written against HAL or LL. RTOS, USB, sensor, and security middleware integrated in CubeIDE.
SMT assembly, ST-LINK V3 programming in fixture, functional test, and ship.
Years of STM32 work across industrial, medical, and consumer programs, matched to the right line for each job.
| STM32 line | Typical use |
|---|---|
| STM32F (F0/F1/F4/F7) | Mainstream Cortex-M0+/M4/M7 workhorses for general-purpose control, connectivity, and cost-sensitive designs. |
| STM32L (L0/L4/L5) | Ultra-low-power Cortex-M for battery and energy-harvesting products; L5 adds TrustZone security. |
| STM32H (H5/H7) | High-performance Cortex-M7/M33 (single or dual core) for compute-heavy industrial, imaging, and DSP-style workloads. |
| STM32U (U5) | Latest ultra-low-power secure line for IoT: Cortex-M33, TrustZone, and OTFDEC for encrypted flash. |
| STM32WB (WB / WBA) | Wireless dual-core parts for Bluetooth LE, Thread, and Zigbee connected products. |
| Toolchain & sensors | STM32CubeIDE, CubeMX, CubeProgrammer, CubeMonitor, plus ST MEMS/sensor X-CUBE middleware. |
Process, scope, and what to expect when you start a project with Jaycon.
STM32H7 for compute-heavy industrial work, STM32U5 for low-power secure IoT, STM32G4 for motor control and digital power, and STM32WB for Bluetooth LE. We have shipped products across the STM32 F, L, H, U, and WB lines.
Both. HAL for fast bring-up and standard peripherals, LL drivers when timing or footprint matters. We can also work in bare-metal CMSIS where required, all from a STM32CubeMX project.
Yes. We wire ST IMUs, ToF, pressure, and environmental sensors to STM32 over I2C and SPI and bring them up with the ST X-CUBE sensor middleware, then validate on the bench.
ST-LINK V3 programmer in a custom fixture during functional test. We also build automated test stations that program, calibrate, and verify in one pass.
From product design and rapid prototyping to precision injection molding and circuit board manufacturing.
We take your idea from sketch to working prototype, with a team that handles both the look and the engineering.
Explore service →
Custom PCB design and assembly, reviewed by engineers before production so nothing gets built twice.
Explore service →
Get a physical part in your hands fast. We use the right technology for your design so you can test and move forward.
Explore service →
When you are ready to scale, we handle the tooling and run production so you can focus on your business.
Explore service →